The XantrexTM Grid Tie Solar Inverter (GT Series) is designed to convert photovoltaic (PV) electricity produced by solar modules into utility-grade power that can be used by the home or sold to the local electrical utility. Offering high efficiency (up to 96.0%), clean aesthetics, high reliability, and a low installed cost, through ease of installation and integrated features, the GT Series is a proved, high-frequency design in a compact enclosure.

The GT Series may be installed as a single inverter, for a single PV array, or in a multiple-inverter configuration for large PV systems.

Description

Technology
An NEC compliant, integrated DC/AC disconnect, standard in the GT Series, eliminates the need for external DC (PV) disconnects, and in some jurisdictions, AC disconnects
Large heat-sink offers extraordinary heat dispersion without the need for a cooling fan
Liquid crystal display (LCD) provides instantaneous information – power level, daily and lifetime energy production, PV array voltage and current, utility voltage and frequency, time online “selling”, fault messages, and installer-customized screens
LCD vibration sensor allows the tap of a finger to turn backlight on and to cycle through display screens
Free PC software for remote monitoring and system troubleshooting available online
Installation
Flexible module selection and sizing due to wide PV input MPPT tracking voltage range
Lightweight and versatile mounting bracket
Easy access DC (photovoltaic) and AC (utility) terminal block simplifies wiring
Rugged NEMA 3R inverter enclosure allows reliable indoor and outdoor installations
Performance
Best-in-class efficiency to maximize solar system return on investment
Accurate MPPT tracking ensures maximum energy harvest under any conditions
FCC Part B compliance provides less external electronic interference
Serviceability
10-year standard warranty
Sealed inverter enclosure can be quickly separated from the wiring box allowing DC/AC connections to remain intact in the unlikely event the inverter needs to be serviced
Electrical Specifications - Output
Modules: GT3.3N
Nominal output power: 240V 208V
Maximum AC power output: 2800w 2700w
AC output voltage (nominal): 240V 208V
AC output voltage range: 211 to 264 Vac 183 to 229 Vac
AC frequency (nominal): 60 Hz
AC frequency range: 59.3 to 60.5 Hz
Maximum continuous output current: 13.8a 14.9a
Maximum output over-current protection: 20a
Maximum utility back feed current: 0a
Total harmonic distortion (THD): <3%
Power factor: > 0.99% (at rated power), > 0.95% (full power range)
Utility monitoring, islanding protection: UL1741-2005 / IEEE 1547
Output characteristics: Current source
Output current waveform: True sine wave

Electrical Specifications - Input
Maximum array open-circuit voltage: 600Vdc
MPPT voltage range (CEC & CSA): 200 to 400 Vdc
MPPT operating range: 200 to 550Vdc
Maximum input current: 17.5Adc 16.5 Adc
Maximum array short-circuit current: 24.0 Adc
Reverse-polarity protection: Short-circuit diode
Ground-fault protection: GF detection, IDIF > 1A
Maximum inverter efficiency: 95.9% 95.6%
CEC efficiency: 95.5% 95.0%
CEC part number: GT3.3N-NA-240/208
Night-time power consumption: 1 w

Environmental Specifications
Operating temperature range: -13°F to 149°F (-25°C to 65°C)
Enclosure type: NEMA 3R (outdoor rated)
Weight: 49.0 lbs (22.2 kg)
Shipping Weight: 57.0 lbs (25.9 kg)
Dimensions: 28.5" x 16" x 5.75" (724 x 403 x 145 mm)
Shipping Dimensions: 34" x 20.5" 10.3125" (866 x 518 x 262 mm)

Mechanical Specifications
Mounting: Wall mount (mounting bracket included)
Input and output terminal: AC and DC terminals accept wire sizes of #14 to #6 AWG
PV / Utility disconnect: Eliminates the need for external PV (DC) disconnect. Complies with NEC requirements.
Cooling: convection cooled, fan not required.
Display: Backlit, two-line, 16-character liquid crystal display provides instantaneous power, daily and lifetime energy production, PV array voltage and current, utility voltage and frequency, time online "selling", fault messages, and installer-customizable screens
Communications: Integrated RS232 and Xanbustm RJ45 communication ports
Wiring box: PV, utility, ground, and communications connections. The inverter can be separated from the wiring box.
Warranty: 10-year standard
Model name (negative ground): GT3.3N-NA-240-/208 UL-05
Part number (negative ground): 864-1006

SunTron uses UPS for all shipments.

Your order will ship from one of our three warehouses, Texas, Arizona, or California. Actual delivery time will depend on product availability and or your proximity to the warehouse stocking the item that is ordered.

Large shipments (i.e. kits) will ship UPS Freight. Orders requiring freight shipment will not be processed until a member of our staff has discussed the estimated freight shipping cost and received customer approval to move forward with the order. Please contact us at 1-877-934-0444 if you have any questions.